1/2 HP Electric Motor
$219.991/2 HP Electric motor replacement for both 30 & 55 gallon Pyranha Spraymaster systems. Will also replace the electric motor on most other insect control systems.
-
-
1/4″ Black Nylon Tubing
$0.55Black Nylon Tubing 1/4″ Black / per foot. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
1/4″ Bleed Valve
$16.50Bleed Valve for end of line 1/4″. Designed for Pyranha Spraymaster systems but will work in most insect control applications. (May look different than picture)
-
1/4″ Elbow With Nut & Ferrule
$8.99Male Elbow 1/4″ Discharge. Used at Brass Cross to connect pressure relief tubing. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
-
1/4″ Union Elbow Connector
$5.99Alpha Union Tubing Elbow Connector 1/4″ Nickel Plated. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
1/4″ Union Tubing Connector
$5.99Alpha Union Tubing Connector 1/4″ Nickel Plated. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
1/4″ Union Tubing Tee Connector
$7.99Alpha Union Tubing Tee Connector 1/4″ Nickel Plated. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
1/4″ White Nylon Tubing
$0.48Nylon Tubing 1/4″, Natural, 250 PSI / priced per foot. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
140 GPH Pump
$125.99Procon Vane Pump, 140 GPH. Pump only. Fits both 55 & 30 Gallon Spraymaster Systems. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
140 GPH Pump Assembly
$155.99Procon Vane Pump, 140GPH, Complete Assembly 140 GPH Pump Assembly Includes 1 Procon Vane Pump, 1 3/8″ Nut & Ferrule, 3/8″ Tubing, 1 Female connector for Intake Filter & 1 Intake Filter. Fits both 55 & 30 Gallon Systems. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
25 PSI Check Valve
$36.9925 PSI Check Valve – Drum Return Replaces CV10 check valve. Installs on short black 3/8″ tube inside drum. Attaches to part
-
25 PSI Check Valve Assembly
$42.9925 PSI Check Valve with 1′ 3/8″ tubing & 1 3/8″ Nut and Ferrule. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
3 PSI Check Valve – Pump Discharge
$25.993 PSI check valve installed between the discharge side of pump and brass cross. Be sure to install with flow arrow pointing towards brass cross. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
3/8″ Elbow With Nut & Ferrel
$10.993/8″ Intake Elbow with Nut & Ferrule. Installs on suction port of pump. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
-
45 Degree Dead End Spray Nozzle Assembly
$30.0045 Degree Dead End Spray Nozzle Assembly-1/4″ MBT nickel Plated, N/S Tip
-
45 Degree Fitting @ Pressure Gauge
$7.9945 Degree Fitting 1/4″ Male Pipe @ Pressure Gauge. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
Back Pressure Regulator Valve
$27.99Back Pressure Valve – Return. Installs under Brass Cross @ Pump. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
Brass Cross
$14.99Brass Cross used @ Pump. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
Drum Top Cover – Black
$39.99Black Spraymaster Top Cover help Keeps your system free of debris and protected from damage.
-
Female Connector For CV25 1/4″
$8.99Female Connector for CV25 1/4″ Used to connect CV10, CV25, CV50 to 3/8″ tubing from pump
-
Female Connector For Intake Filter 3/8″
$6.99Female Connector for Intake Filter. Used to attach Intake Filter to 3/8″ tubing from Pump. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
Intake Filter
$24.99Intake Filter for end of Pump Suction Line. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
Large Tip O Ring
$0.16Large O Ring used between spray tip and nozzle barrel. Replacement spray tips # 005-STNS come supplied with this part. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
Male Branch Tee
$11.99Male Branch Tee 1/4″ Nickel Plated without Barrel. Used to connect the nozzle barrel to nylon tubing. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
Nozzle Barrel
$5.99Nozzle Barrel 1/4″ Nickel Plated No Tip, No Tee. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
Pressure Gauge
$32.00300psi Liquid Filled Gauge. Designed for Pyranha Spraymaster systems but will work in most insect control applications
-
-
-
Small O Ring
$0.25Small O Ring. Used when rebuilding Spray Tips. This O -ring is used when rebuilding the inside parts of a spray nozzle. It is NOT used between the spray tip and the nozzle barrel and is not visible when looking at the spray tip. The only visible O-ring is part #005-ORL, Large O-ring.
-
Spray Nozzle Assembly
$25.00Nickel Plated, Nickel Silver Hago Tip. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
Spray Nozzle Extension
$2.15Spray Nozzle Extension. Adds Length to Nozzle. Primarily used in above ceiling installations.
-
Spray Tip Plug
$6.99Spray Tip Plug. Used to keep an existing nozzle from misting. Commonly placed in stalls utilized for temporary hay storage. This item has been discontinued by manufacturer. Made “in house”. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
Spray Tip w/ Filter
$12.50Replacement Spray tip, Nickel/Silver. Includes Large O-Ring. Designed for Pyranha Spraymaster systems but will work in most insect control applications.
-
-
